How to produce the painting products
Log Cutting
The timber logs are cut into boards.
Kiln Drying
Then kiln dried to within 8-12% moisture range to ensure stability through the successive manufacturing processes.
Moisture Conditioning
After KD,the boards should stay in the warehouse for more than 20 days (Note that diffreent size board require different days),to keep the material more stable and to make moisture content more uniform.It's very important.
Defect Removal & Finger Jointing
The defects on the board will be cut before finger jointed.The length of moulding can be finger jonted up to 18ft,or as customized. After that,the finger jointed board would be through rough sanding, then make into shape(as customers' drawings) by the Shape machine.
Priming
Then the raw unprimed moulding will be through two coat primer(Sanding between coat). Coating application would be applied equally on all edges have a strong adhesion to the wood substrate.
Pre-Paint Inspection
Each pieces products will be inspected by our workers before painting to ensure the surface smooth.
Painting
The primed products will go through the two painting process, one layer of base paint, and the other that of surface paint.
Oven Drying
The painted products immediately enter the drying oven after painting to ensure rapid surface drying.
Air Drying & QC
The dried products may be placed on racks for further air drying and undergo a secondary inspection by the quality control department during the drying process.
Packing
All the products will be packed according to the customer's packing requirement.